Wheels for Casters

Rubber – Thermal Plastic Wheels

Softer than polyurethane, Rubber-Thermal Plastic caster wheels can withstand exposure to many chemicals and solvents with less than 10% acidity. This material also climbs easier over obstacles, uneven floors, joints, and gaps, better grips slippery floors, absorbs shocks, and protects floors.

Nomadic

  • Non-marking high grade thermo elastomer tread chemically bonded to a polyolefin core
  • Resistance to cleaning chemicals, acids, alcohols and water
  • Durometer: Shore A 65 (+/-5)
  • Temperature range: -20°F to 180°F

Shop Casters with this Wheel

Soft Rubber

  • Solid soft tread on hard rubber core with nylon sleeve
  • Black as standard
  • Durometer: Shore A 80 (+/-5)
  • Temperature range: -40°F to 160°F

Hard Rubber

  • Solid hard rubber with nylon sleeve
  • Black as standard
  • Durometer: Shore D 55 (+/-5)
  • Temperature range: -40°F to 160°F

Shop Casters with this Wheel

Mold-On Rubber

  • Vulcanized rubber tread on cast iron core
  • Durometer: Shore A 80 (+/-5)
  • Temperature range:-40°F to 180°F

Shop Casters with this Wheel

Polyurethane Wheels

Polyurethane caster wheels are injection-molded, mechanically and chemically bonded to a polyolefin center. They are non-marking, non-conductive, and superior to rubber in withstanding grease, oil, cutting, chunking, and abrasive wear.

Swivel EAZ® (SE)

  • With 10 years in service the Swivel-EAZ® wheels alone have shown a minimum 35-50% reduction in push/pull.
  • Designed to reduce turning and rolling resistance on swivel, rigid, and fixed axle systems
  • Durometer: Shore 70A, 80A, 95A, 60D & 75D as Standard
  • Custom Specifications are also Available

Shop Casters with this Wheel

Super Elastomer (UX)

  • Ultraflex is uniquely formulated for best ergonomic push/pull after set and in-line operation
  • Extra thick PU tread for best cushioning ride
  • Yellow as standard color
  • Durometer: Shore A 80-85

Shop Casters with this Wheel

Super Poly (SP)

  • Solid cast polyurethane elastomer
  • Superior Ergonomics
  • Slightly Crowned Tread
  • Bright Safety Orange color
  • Durometer: Shore D 60 (+/-5)
  • Temperature range: -50°F to 180°F

Shop Casters with this Wheel

Polymadic (PM)

  • High performance UV resistant polyurethane mechanically locked to polyolefin core
  • 1-1/4″ wide wheels are maroon tread on gray core, w/dual row annular ball bearings
  • 2″ wide wheels have optional dark gray and maroon tread on gray core
  • Durometer: Shore D 60 (+/-5)
  • Temperature range: -20°F to 180°F

Shop Casters with this Wheel

Ergolastomer (HU)

  • Super strength solid cast polyurethane elastomer mechanically locked with glass filed nylon bearing collar
  • Variety of bearing options for optimal performance at different application
  • Gray color with black bearing collar
  • Durometer: Shore 65 (+/-5)
  • Temperature range: -50°F to 180°F

Shop Casters with this Wheel

Poly-Pro (PP)

  • Non-marking polyurethane tread mechanically locked to polyolefin core
  • Variety of designs, colors and bearing options available
  • Durometer: Shore D 60 (+/-5)
  • Temperature range: -20°F to 180°F

Shop Casters with this Wheel

Polyon (PU)

  • Polyurethane tread chemically bonded to cast iron core
  • Precision ball bearings and tapered roller bearings are available
  • Durometer: Shore A 95 (+/-5)
  • Temperature range: -40°F to 180°F

Shop Casters with this Wheel

Energy Saver Polyon (SW)

  • Crowned polyurethane tread chemically bonded to a solid heavy-duty cast iron core
  • Variety of bearing options for optimal performance at different applications
  • Durometer: Shore A 95 (+/-5)
  • Temperature range: -40°F to 180°F

Shop Casters with this Wheel

Duralastomer (SU)

  • Solid cast polyurethane elastomer
  • Blue as standard color
  • Durometer: Shore D 60 (+/-5)
  • Temperature range: -50°F to 180°F

Shop Casters with this Wheel

Plastic & Resin Wheels

Plastic and resin caster wheels are made from macerated canvas and resin and molded under high pressure and heat. They are recommended for smooth concrete and can be used for storage. They are also highly resistant to grease, oil, gas, and mild acids.

Polyolefin (PO)

  • Excellent chemical resistance
  • Non-marking
  • Broad selections of wheel and tread design
  • Temperature range: -20°F to 180°F

Shop Casters with this Wheel

Maxrok (MA)

  • 30% glass filled nylon wheel
  • Extreme impact strength, will not flat spot
  • Excellent resistance to grease, oil, most chemical and cleaning solutions
  • Durometer: Shore D 85 (+/-5)
  • Temperature range: -45°F to 190°F

Shop Casters with this Wheel

Nylon (NY)

  • Solid wheel molded from nylon 6
  • High impact resistance strength
  • Excellent resistance to grease, oil, most chemical and cleaning solutions
  • Durometer: Shore D 75 (+/-5)
  • Temperature range: -40°F to 210°F

Shop Casters with this Wheel

Ironman (NX)

  • Compression molded to its maximum strength
  • Machined slight crowned tread
  • Durometer: Shore D 78-82
  • Temperature range: -40°F to 250°F, enduring sharp temperature changes
  • Excellent for power tow application

Phenolic (PH)

  • Canvas fiber filled Phenolic for high impact resistance
  • Durometer: Shore D 90 (+/-5)
  • Temperature range: -50°F to 250°F

Shop Casters with this Wheel

Thermo-Compound (GN)

  • Made out of exclusively engineered thermo compound
  • Excellent for autoclave and steam cleaning applications
  • Superior abrasion and impact resistance
  • Durometer: 85 shore D (+/-5)
  • Temperature range: 425°F continuous, 475°F to 550°F intermittent
  • All load capacities are rated for room temperatures

Shop Casters with this Wheel

Steel & Ductile Wheels

Steel and Ductile Steel caster wheels are made for extreme weights that normal wheels cannot handle. They are robust and can withstand temperatures up to 700°F.

Semi-Steel (SS)

  • Precisely machined semi-steel wheels
  • Hardness: Brinell 145
  • Tensile strength of 30,000 PSI
  • Temperature range: -45°F to 600°F

Ductile Steel (DS)

  • Made out of Ductile Iron, extra thick walled, heavy-duty core, hub and tread
  • Variety of bearing options for optimal performance at different applications
  • Tensile strength of 45,000 PSI
  • Temperature range: -45°F to 800°F

Shop Casters with this Wheel

Crowned Ductile Steel (CD)

  • Slightly crowned tread various bearings options for optimal performance at different applications
  • Extra thick walled, heavy-duty core, hub and tread face
  • Tensile strength of 45,000 PSI
  • Temperature range: -45°F to 800°F

Shop Casters with this Wheel

Drop Forged Steel (FS)

  • Drop forged from ASTM1045 high carbon steel
  • Variety of bearing options for optimal performance at different applications
  • Hardness: Rockwell 80 B
  • Tensile strength of 60,000 PSI
  • Temperature range: up to 1,300°F

V-Groove Wheels

Designed to guide equipment by rolling on an inverted angle iron track. Elevated track minimizes problems caused by floor debris. When not operating on track the wheel tread on both sides of the V-groove allows for use on smooth floors.

Cast Iron V-Groove (VG)

  • V-Groove is precisely machined 90°, with relief groove
  • Tensile strength of 30,000 PSI
  • Temperature range -45°F to 600°F

Shop Casters with this Wheel

Ductile V-Groove

  • Rust free and quiet in operation
  • Durometer: Shore D 85 (+/-5)
  • Temperature range: -45°F to 800°F

Shop Casters with this Wheel

Forged/Solid Steel V-Groove (FV)/(SV)

  • Precisely machined 90° V-Groove with relieve groove
  • Drop forged from ASTM1045 high carbon steel
  • Variety of bearing options for optimal performance at different applications
  • Hardness: Rockwell 80B
  • Tensile strength of 60,000 PSI
  • Temperature range: up to 1,300°F